학술 논문
  1. Stress distribution of molars restored with minimal invasive and conventional technique: a 3-D finite element analysis (2019)
  2. Denture flask fabrication using fused deposition modeling three-dimensional printing (2019)
  3. Comparison of different impression techniques for edentulous jaws using three-dimensional analysis (2019)
  4. 구치부 지지의 상실과 마모로 인해 교합이 붕괴된 환자에서 수직고경 회복을 동반한 구강회복 증례 (2018)
  5. 과도한 치조제 흡수를 보이는 무치악 환자에서 Centric tray와 폐구법 인상을 이용한 총의치 수복 증례 (2018)
  6. 임플란트 지지 서베이드 금관을 이용한 하악의 가철성 국소의치 수복 증례 (2018)
  7. 비심미적인 상악 전치부 환자에서 이중 스캔을 이용한 심미보철 수복 증례 (2018)
  8. 상악 전치부 단일 임플란트의 심미 보철 수복 증례 (2018)
  9. Stress distribution in premolars restored with inlays or onlays: 3D finite element analysis (2018)
  10. 내측 연결 및 외측 연결 방식으로 설계된 임플란트의 3차원적 유한요소 응력 분석 (2017)
  11. 구치부 보철 수복 공간이 부족한 환자에서 이중 스캔을 이용한 구강회복 증례 (2017)
  12. Analysis of the width ratio and wear rate of maxillary anterior teeth in the Korean population (2017)
  13. Evaluation of Sandblasting on Mechanical Properties and Cell Response of Bioactive Glass Infiltrated Zirconia (2017)
  14. Full mouth rehabilitation with iliac bone graft for a patient with traumatic neuroma in mandible (2017)
  15. 하악 무치악 환자에서 Parallel guide KIT®를 이용한 임플란트 식립 및 Locator 어태치먼트를 이용한 임플란트 피개의치 수복증례 (2017)
  16. Effect of ferrule on the fracture resistance of mandibular premolars with prefabricated posts and cores (2017)
  17. 상하악 전치부 심한 변색과 마모를 보이는 쉐그렌 증후군 환자에서twin-stage법을 이용한 수복증례 (2016)
  18. Histological evaluation of nano-micro titanium implant surface treatment in beagle humerus (2016)
  19. A New Fast and Simple Border Molding Process for Complete Dentures Using a Compound Stick Gun (2016)
  20. Overdenture with magnetic attachments for a patient with Parkinson’s disease: a case report (2016)
  21. Overdenture treatment in patient with severely worn dentition: a case report (2016)
  22. Evaluation of Surface Characteristics and Physical Properties on biodegradable magnesium calcium alloys by anodic oxidation (2016)
  23. 중심위로의 유도가 어려운 환자의 수복 증례 (2015)
  24. 파킨슨 병을 가진 환자의 상악 마그네틱 피개의치 및하악 임플란트 피개의치 수복 증례 (2015)
  25. 불규칙한 하악 운동을 하는 환자의 treatment denture를 이용한 총의치 수복 증례 (2015)
  26. Analysis of Removal Torque of Injection Molded Zirconia Implants; An Experimental Study on Beagles (2015)
  27. An alternative method to convert fractured metal ceramic surveyed crown into a complete contour zirconia surveyed crown using CAD-CAM technology under anticancer treatments: a clinical report (2015)
  28. Influence of preparation depths on the fracture load of customized zirconia abutments with titanium insert (2015)
  29. MicroCT Analysis of Micro-Nano Titanium Implant Surface on the Osseointegration (2015)
  30. 심한 치조제 흡수를 보이는 무치악 환자에서 Jiro Abe법에 의한 완전틀니 제작 증례 (2014)
  31. 임시치아 double scanning을 이용한 전악 임플란트 수복 증례 (2014)
  32. 기성품 바 어태치먼트 시스템인 SFI bar를 이용한 피개의치 전악수복 증례 (2014)
  33. Cytotoxicity of soft denture lining materials depending on their component type (2014)
  34. Shore hardness and tensile bond strength of long-term soft denture lining materials (2014)
  35. Loosening suppression of dental implant abutment screw coated with Au or TiCN (2014)
  36. Effect of zirconium content on the microstructure ,physical properties and corrosion behavior of Ti alloys (2014)
  37. 전악수복환자에서 Shilla system을 이용한 교합평면 재구성 증례 (2013)
  38. 다수치아를 상실한 엇갈린 교합 환자에서 임플란트와 Locator attachment를 이용한 가철성 국소의치 증례 (2013)
  39. 강한 교합력과 과도한 마모를 보이는 환자의 전악수복 증례 (2013)
  40. 과도한 치관높이 공간을 가진 환자에서 유지관리를 고려한 임플란트 수복증례 (2013)
  41. 장애인 환자에서의 전악 수복 증례 (2013)
  42. Titanium Dioxide Nanotube Modified Implants:An Animal Study on Bone Formation (2013)
  43. Focal adhesion linker proteins expression of fibroblast related to adhesion in response to different transmucosal abutment surfaces (2013)
  44. Evaluation of Sustained Drug Delivery for Bone Morphogenetic Protein on the Functionalized Nanotubular Surface (2013)
  45. Effect of loading time on marginal bone loss around hydroxyapatite-coated implants (2013)
  46. Study on high temperature processing of biocompatible Ti-10Ta-10Nb alloys (2013)
  47. A morphometric analysis of maxillary central incisor on the basis of facial appearance in Korea (2012)
  48. Antibacterial Effect of Visible Light Reactive TiO2/Ag Nanocomposite Thin Film on the Orthodontic Appliances (2011)
  49. The Effect of Titanium on the Castability of Cobalt-Chrome Alloy (2011)
  50. Histomorphometric Evaluation of an Implant with a Nanotubular Surface Treatment in a Beagle Femur (2011)
  51. Marginal accuracy and internal fit of machine-milled and cast titanium crowns (2011)
  52. 염화수화물용액 침지법으로 제작한 유색 지르코니아와 전장도재의 전단결합강도 (2010)
  53. 연성 의치이장재의 온성방식이 경화반응 속도와 쇼어 경도에 미치는 영향 (2010)
  54. Rabbit calvaria 를 이용하여 hyaluronic acid (HA) 를 처리한 poly (D, L-lactic-co-glycolic acid) 차폐막들의 골 생성능력에 대한 비교 연구 (2010)
  55. Shear Bond Strength and Failure Types of Polymethyl Methacrylate Denture Base Resin and Titanium Treated with Surface Conditioner (2010)
  56. Fracture load of implant supported zirconia all-ceramic crowns luted with various cements (2010)
  57. 임플란트 지대주나사 코팅이 결합안정성에 미치는 영향에 미치는 영향 (2009)
  58. 성견 하악골에 식립한 다양한 임플란트 표면에서의 골치유 양상에 관한 연구 (2009)
  59. 필러 종류가 폴리비닐실록산 치과용 인상재의 물리적 성질 및 경화 특성에 미치는 영향 (2009)
  60. 티타니움 표면의 알칼리-열처리가 골모세포의 분화에 미치는 영향 (2009)
  61. Shear bond strength of composite resin to titanium according to various surface treatments (2009)
  62. Cell response to a newly developed Ti-10Ta-10Nb alloy and its sputtered nanoscale coating (2009)
  63. Effect of adhesive primers on bonding strength of heat cure denture base resin to cast titanium and cobalt-chromium alloy (2009)
  64. Comparion of stability in titanium implants with different surface topographies in dogs (2009)
  65. Oral rehabilitation for a patient with oligodontia and maxillary hypoplasia (2009)
  66. Histologic evaluation and removal torque analysis of nano- and microtreated titanium implants in the dogs (2009)
  67. 부가중합형 실리콘 고무인상재의 표면에너지와 접촉각 (2008)
  68. Wettability and drug delivery of functionally graded nano-micro porous titanium surface (2008)
  69. 치조골 폭경과 임플랜트 고정체의 직경에 따른지지조직의 응력분포 (2007)
  70. 타이타늄의 표면개질에 따른 도재 결합 특성 (2007)
  71. 타이타늄 상악 주연결장치에 디자인에 따른주조성 및 견고성 비교 (2007)
  72. 임플랜트 나사선 경사각이 치조골응력 분포에 미치는 영향 (2007)
  73. 티타늄의 표면처리 방법에 따른 저온소성도재와의 결합강도 (2007)
  74. 타이타늄 표면 코팅 처리에 따른 타이타늄도재관의 파절강도 비교 (2007)
  75. 도재라미네이트 접착용 레진시멘트의 색조 안정성에 관한 연구 (2007)
  76. 타이타늄의 표면거칠기가 도재의 결합강도에 미치는 영향 (2007)
  77. 주입선 형태가 타이타늄 합금의 주조성에 미치는 영향 (2007)
  78. Surface characteristics and bioactivity of oxide film on titanium metal formed by thermal oxidation (2007)
  79. 주조기와 매몰재의 성분변화에 따른 티타늄의 주조성에 관한 연구 (2006)
  80. 임플랜트 지대주 재료에 대한 치은 섬유아세포의 반응 (2006)
  81. 원심 주조된 타이타늄과 타이타늄 합금의레이저 용접 특성 (2006)
  82. 주조티타늄과 기계절삭티타늄 코핑의 변연적합성에 관한 연구 (2006)
  83. 투명 fiber 포스트를 통한 광중합형 접착레진의 중합 반응 (2006)
  84. 도재라미네이트에 사용되는 수종의 레진시멘트와 try-in paste 의 색조 비교 (2006)
  85. Streptococcus mutans 의 자당 대사에 미치는 과당의 영향 (2006)
  86. 임플랜트 지대주에 따른 나사 풀림의 연구 (2006)
  87. 임플랜트 고정체의 형태와 연결방식에 따른 임플랜트 및지지조직의 응력분포 (2004)
  88. Ti-Ta-Nb계 합금의 세포 독성과 생체 적합성의 평가 (2004)
  89. Streptococcus mutans의 인공 치태 형성을 억제하는 Lactobacillus의 분리 (2004)
  90. Acryric resin 표면의 거칠기에 따른 세균부착 비교 (2004)
  91. 인상채득방법이 임플란트 주모형의 정확성에 미치는 영향 (2004)
  92. Fracture strengths of ceromer crowns supported on the various abutment core materials (2004)
  93. 티타늄 산화 조건에 따른 산화막의 특성 및 인산갈슘 생성에 미치는 영향 (2003)
  94. 티타늄의 열처리 조건에 따른 동전위 양극 분극 특성 및 표면미세구조 변화 (2002)
  95. 한국 성인의 상악 전치부 인공치아 선택기준에 관한 계측학적 연구 (2002)
  96. 접착용 시멘트의 결합강도에 임시 접착제와 탈감작제가 미치는 영향 (2002)
  97. Ceromer crown의 교합면 두께에 따른 압축 파절 강도의 비교 (2002)
  98. 나사형 임플란트 고정체의 길이, 직경, 플랫폼 형태에 따른 임플란트와 주위조직의 응력분포 (2002)
  99. Comparison of the fracture strengths of metal-ceramic crowns and three ceromer crowns (2002)
  100. Effect of poling conditions on growth of calcium phosphate crystal in ferroelectric BaTiO3 ceramics (2002)
  101. 수복재료와 임플랜트 종류에 따른 임플랜트 및 지지조직의 응력분석 (2001)
  102. Calcium phosphate 결정 성장 최적화를 위한 Ti 표면의 BaTiO3 박막 형성에 관한 연구 (2001)
  103. Ceromer의 법랑질 및 금합금에 대한 마모도 연구 (2001)
  104. 고무 인상채득시 지대치재료와 표면 처리법의 영향 (2001)
  105. 적합도가 다른 임플랜트 지지 보철물의 삼차원적 응력 분석 (2001)
  106. Hybrid ceramic crown과 금속 도재관의 파절강도 비교 (2001)
  107. The effects of dowel design and load direction on dowel-and-core restorations (2001)
  108. The effect of thermal change on various dowel-and-core restorative materials (2001)
  109. 타액오염이 트레이 레진 및 변연 형성재와 Polysulfide 인상재의 접착력에 미치는 영향 (2000)
  110. Stress analysis of anterior cantilever bridge (2000)
  111. A 2-year clinical evaluation of Sculpture crowns (2000)
  112. 전장용 레진의 색안정성에 대한 연구 (1999)
  113. Opaque 두께가 전장용 레진의 색채에 미치는 영향 (1999)
  114. Finite element stress analysis on the effect of splinting in fixed partial dentures (1999)
  115. 강도보강용 섬유나 금속이 레진의 파절 강도에 미치는 영향 (1998)
  116. Nd : YAG 레이저가 상아질 및 도재와 복합레진간의 결합강도에 미치는 영향 (1997)
  117. 의치상 레진과 이종 레진의 결합강도에 대한 타액오염의 영향에 대한 연구 (1997)
  118. 금전착이 치과용 합금과 전장 레진간의 접착 강도에 미치는 영향 (1997)
  119. 골결손부가 있는 발치직후 매식 임플란트에서 탈회동결건조골과 GTAM차단막이 골재생에 미치는 영향 (1997)
  120. 보철물 절삭시 수종의 치과용 절삭기구와 냉각제의 효율성에 관한 연구 (1996)
  121. 비고정성 연결장치의 위치에 따른 고정성 보철물의 응력분석 (1996)
  122. 미소 전류 자극이 TPS-IMZ 임프란트 주위의 골유착과 골형성에 미치는 영향 (1996)
  123. Stress analysis of a cantilevered fixed partial denture with normal and reduced bone support (1996)
  124. 내부 금속관의 설계에따른 레진 전장관의 파절강도에 관한 연구 (1995)
  125. Pd-Ag 및 Ni-Cr 합금의 금 전착이 전장 레진의 색채에 미치는 영향 (1995)
  126. 금속 종류가 전장 레진 및 도재의 색채에 미치는 영향 (1994)
  127. 수종의 치과용 수복재료 및 시멘트의 radiopacity (1994)
  128. 치과용 인상재의 점성에 관한 연구 (1994)
  129. FTC-2000을 이용한 결핵균의 중합연쇄반응에 관한 연구 (1993)
  130. 임플랜트와 자연치를 지대치로 한 고정성 보철물의 응력분석 (1993)
  131. 상악측절치 수복을 위한 Cantilever bridge 장착시 치조골의 응력분석 (1993)
  132. 치과 도재용 금속의 재사용에 따른 금속과 도재간의 결합 강도에 관한 연구 (1993)
  133. 접착성 레진의 보철 영역에의 활용 (1992)
  134. A two dimensional stress analysis of fixed prosthesis with rigid or nonrigid connectors (1992)
  135. Cantilever bridge 장착시의 응력 분포에 관한 연구 (1991)
  136. 금관 가공의치에서의 인상 (1991)
  137. A two-dimensional stress analysis comparing fixed prosthodontic approaches to the tilted molar abutment (1991)
  138. 글레스아이오노머 시멘트의 초기경화에 수분이 미치는 영향에 관한 연구 (1990)
  139. 역행 충전시 수복재와 와동형태에 따른 변연 누출의 정량적 분석 (1989)
  140. 복합레진의 조성 변화가 물리적 성질에 미치는 영향에 관한 연구 (1989)
  141. Finite Element Analysis of Stress Distribution in Metal-ceramic Crowns (1989)
  142. 아크릴릭 레진의 색차에 관한 실험적 연구 (1989)
  143. 전치부 치간이개의 수복종류에따른 유한요소법적 응력분석 (1989)
  144. 도재전장관의 심미성 (1988)
  145. Esthetic Consideration of PFM Crown (1988)
  146. Post 형태에 따른 치근 내부와 지지조직의 응력분산에 관한 2차원적 연구 -광탄성 및 유한요소법적 연구- (1988)
  147. 비저작측 교합간섭이 저작근 활성도에 미치는 영향 (1988)
  148. The Effect of Additives on the Physical Properties of Dental Plaster (1987)
  149. 불소방출 레진의 합성과 충전된 치질내의 불소농도 변화에 관한 연구 (1987)
  150. 식각된 비 귀금속 합금과 법랑질간의 접착 인장강도에 대한 연구 (1987)
  151. 전치부 계속치의 지대치 및 지지조직의 역학 반응에 관한 유한요소법적 연구 (1987)
  152. 연마법이 치과용 복합레진의 표면 조도에 미치는 영향에 관한 실험적 연구 (1987)
  153. 연마법의 차이가 silicate cement 의 표면조도에 미치는 영향에 관한 연구 (1985)
  154. 치관수복물의 형태와 치은반응에 관한 연구 (1983)